Modelik

NEW! Modelik 02_24 RENAULT FT-17

RENAULT FT-17 - Image 1
Skaala: 1:25
Tootja: Modelik
Toote kood mod02_24
Saadavus: laos!
€10.61 või 6100 pnk

Sisaldab käibemaksu 22%
saatmisel riiki: Eesti
Riigi muutmiseks klõpsake siin

Üldteave

TootjaModelik
Toote koodmod02_24
Kaal:0.08 kg
Skaala1:25
Lisatud kataloogi:2.4.2024
Sildid:FT-17

The Renault FT-17 was a French light tank from the First World War. The first prototypes of the vehicle were created at the end of 1916, and serial production started in 1917 and lasted until 1919, ending with the production of about 3,700-4,000 cars. The tank was powered by a single 35hp Renault 18CV carburetor engine. Its main armament was either a single Puteaux cannon 37mm L / 21 or 1 7.92 mm Hotchkiss machine gun. The armament was mounted in a round cast tower by Renault or a conical riveted tower by Berliet.

Renault FT-17 was one of the most revolutionary tank designs of World War I, as it was the first vehicle in history to feature a classic tank design: the driver's seat was located in the front, the combat compartment with a rotating turret was placed in the middle, and the engine compartment at the rear. This layout has been preserved in tanks to this day, due to its high functionality. The Renault FT-17 was also small in size and had a crew of only two people, which was unheard of compared to other tanks of that period! Renault FT-17 also received a special "tail" at the rear of the fuselage, which made it easier for it to overcome the trenches on the battlefield. The vehicle, which debuted on the battlefield on May 31, 1918, fought until the end of the war, proving to be the most effective and reliable tank of the French army. After 1918, it was widely exported (e.g. to Poland or the USA), often constituting the first tank in the history of the armed forces of a given country. The Italian FIAT 3000 tank and the Soviet MS-1 were also based on its design. Renault FT-17 remained in the arsenals of the French and Polish armies until the outbreak of World War II, but at that time it was perceived as completely obsolete design.

The models are digitally printed - some adhesives can dissolve the ink! 

Paint in digital printing can be dissolved by certain types of adhesives like butaprene and similar on the same solvents. Before bonding, it is advisable to try the adhesive used on a barely visible part of the model.

Viga kirjelduses? Teata probleemist
Kliendi tagasiside
Lisage tagasiside: RENAULT FT-17
...
Lisatud kataloogi: 2.4.2024
Saadavus: laos!
  • toode saadaval
  • toode pole saadaval
  • toode saadaval nõudmisel
  • tarne
  • pole saadaval
  • 1 tk
  • 2 tk
  • 3-5 tk
  • 6-10 tk
  • ülal 10 tk
Kas on võimalik järeltellida kaupa, mida veebisaidil ei ole loetletud või mis on märgitud kui „pole saadaval“?
Soovitataud lisad

Tootja: Guideline Publications
Toote kood GUI-GP565198
Saadavus laos!

€27.30 või 17800 pnk

Tootja: Kagero
Toote kood KAG-FS-0029-EN
Saadavus laos!

€27.53 või 15400 pnk

Tootja: Kagero
Toote kood KAG-TD-7047
Saadavus laos!

€19 või 10600 pnk

Tootja: ADH Publishing
Toote kood ADH-MIM074
Saadavus 2-6 nädalat

€7.36 või 4800 pnk

Sarnased tooted

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-210
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-209
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-206
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-228
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-208
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:100
Tootja: Zebrano
Toote kood ZBR-Z100-207
Saadavus laos!

€10.89 või 7100 pnk

Skaala: 1:35
Tootja: RPM
Toote kood rpm35067
Saadavus laos!

€37.21 või 24300 pnk

Skaala: 1:35
Tootja: Meng Model
Toote kood MNG-TS011
Saadavus laos!

€34.26 või 22400 pnk

Skaala: 1:72
Tootja: First to Fight
Toote kood FTFPL021
Saadavus laos!

€10.97 või 6100 pnk

Skaala: 1:72
Tootja: First to Fight
Toote kood FTFPL013
Saadavus laos!

€10.97 või 6100 pnk

Skaala: 1:35
Tootja: RPM
Toote kood rpm35060
Saadavus laos!

€37.21 või 24300 pnk

Skaala: 1:35
Tootja: JSC
Toote kood JSC805
Saadavus laos!

€1.86 või 1100 pnk