Heller

Heller 80272 Grumman F6F-5 Hellcat

Grumman F6F-5 Hellcat - Image 1
Skaala: 1:72
Tootja: Heller
Toote kood hlr80272
Saadavus: laos!
€10.60 või 6900 pnk

Sisaldab käibemaksu 22%
saatmisel riiki: Eesti
Riigi muutmiseks klõpsake siin

Üldteave

TootjaHeller
Toote koodhlr80272
Kaal:0.10 kg
Ean:3279510802726
Skaala1:72
Lisatud kataloogi:30.10.2004
Sildid:Grumman-F6F-Hellcat

The Grumman F6 Hellcat is an American, single-engine, WWII, semi-shell fighter in a low wing design. The F6 Hellcat was developed as a development of the successful F4F design. When designing it, 18-month-long experience with the operation of F4F in the Pacific and numerous comments of pilots fighting on Wildcat airplanes was used. Structurally, the F6 Hellcat resembled its predecessor with one major change. A low wing system was used, which allowed the landing gear to be retracted into the lower center wing instead of into the fuselage. This increased the track width and the stability in motion on the ground. Additionally, the cockpit armor was used and the ammunition was increased. The U.S. Navy's evaluation of the Grumman proposal resulted in an order in June 1941 for four prototypes - from the XF6F-1 to the XF6F-4 - each with a different powertrain. The XF6F-1 flight took place a year after signing the contract, but due to the urgent need to strengthen the Wildcats (F4F), the same airframe was equipped with the most powerful of the available Pratt-Whitney R-2800-10 engines, thanks to which the plane made its next first flight, this time as the XF6F-3. Even before this second flight took place, Grumman was commissioned to implement the F6F-3 into production as the Hellcat. At this stage, the similarity of the F4F and F6F resulted in a reduction in the time needed to implement the machine into series production. The flight of the first such machine took place at the end of 1942, and shipments to the USS Essex began in January 1943. In August of the same year, the VF-5 squadron from the USS Yorktown was the first to use its Hellcats against the Japanese. The structure of the plane was entirely made of metal, connected with flush rivets, and the wings were folded with tips to facilitate hangar on the deck of aircraft carriers. Standard armament consisted of six 12.7 mm machine guns mounted in the nose of the wing. The hull and tail were of a classic design, differing from the F4F only in dimensions. The three-support undercarriage was fully retractable by means of a hydraulic system, as was the hook for shortening the landing run. The spacious pilot's cabin was raised high above the plane of the wings. The production of all versions of the F6 exceeded 12,200 copies, and its intensity was so high that it was possible to replace the F4F used so far with them very quickly. Technical data (for the F6F-5 version): Top speed: 620 km / h, climb speed: 14 m / s, practical ceiling 11,400 m, maximum range: 1,755 km, armament: fixed - six 12.7mm Browning machine guns Suspended - up to 1800 kg of bombs or an additional fuel tank.

Viga kirjelduses? Teata probleemist
Kliendi tagasiside
Lisage tagasiside: Grumman F6F-5 Hellcat
...
Lisatud kataloogi: 30.10.2004
Saadavus: laos!
  • toode saadaval
  • toode pole saadaval
  • toode saadaval nõudmisel
  • tarne
  • pole saadaval
  • 1 tk
  • 2 tk
  • 3-5 tk
  • 6-10 tk
  • ülal 10 tk
Kas on võimalik järeltellida kaupa, mida veebisaidil ei ole loetletud või mis on märgitud kui „pole saadaval“?
Soovitataud lisad

Skaala: 1:72
Tootja: AML
Toote kood AMLA72083
Saadavus laos!

€4.98 või 3300 pnk

Tootja: Warpaint Books Limited
Toote kood WRP84
Saadavus laos!

€23.37 või 15300 pnk

Tootja: Valiant Wings Publishing
Toote kood VWP-AM-15
Saadavus laos!

€39.08 või 25500 pnk

Tootja: MMP Books
Toote kood MMP-Spot27
Saadavus laos!

€27.59 või 15400 pnk

Skaala: 1:72
Tootja: Metallic Details
Toote kood MTD-MDR7274
Saadavus 2-8 nädalat

€17.48 või 11400 pnk

Skaala: 1:72
Tootja: Metallic Details
Toote kood MTD-MDR7284
Saadavus 2-8 nädalat

€16.14 või 10600 pnk

Tootja: Naval Fighters
Toote kood NAV92
Saadavus 2-8 nädalat

€70.67 või 46200 pnk

Skaala: 1:72
Tootja: Print Scale
Toote kood PRI-PSR72018
Saadavus laos!

€42.83 või 28000 pnk

Skaala: 1:72
Tootja: Mini World
Toote kood MNW-A7227b
Saadavus laos!

€12.26 või 8000 pnk

Skaala: 1:72
Tootja: Print Scale
Toote kood PRI-PSR72017
Saadavus laos!

€25.70 või 16800 pnk

Skaala: 1:72
Tootja: RES/KIT
Toote kood RSK-72-0106
Saadavus laos!

€6.58 või 4300 pnk

Skaala: 1:72
Tootja: Furball Aero-Design
Toote kood FADS7204
Saadavus laos!

€22.65 või 14800 pnk

Sarnased tooted

Skaala: 1:72
Tootja: Heller
Toote kood hlr56272
Saadavus 5-10 tööpäeva

€11.96 või 7800 pnk

Skaala: 1:72
Tootja: Hasegawa
Toote kood hasB11
Saadavus laos!

€10.30 või 6700 pnk

Skaala: 1:72
Tootja: Academy
Toote kood aca12481
Saadavus laos!

€11.86 või 7800 pnk

Skaala: 1:72
Tootja: Eduard
Toote kood edu7077
Saadavus laos!

€17.05 või 11100 pnk

Skaala: 1:72
Tootja: Hobby Boss
Toote kood HBB80260
Saadavus laos!

€7.63 või 5000 pnk

Skaala: 1:72
Tootja: Eduard
Toote kood edu7079
Saadavus laos!

€19.14 või 12500 pnk

Skaala: 1:72
Tootja: Hasegawa
Toote kood has00634
Saadavus laos!

€21.01 või 13700 pnk

Skaala: 1:72
Tootja: Eduard
Toote kood edu7434
Saadavus 2-8 nädalat

€13.65 või 8900 pnk

Skaala: 1:32
Tootja: Hasegawa
Toote kood hasST07
Saadavus laos!

€38.28 või 25000 pnk

Skaala: 1:48
Tootja: Hobby Boss
Toote kood HBB80339
Saadavus laos!

€18.31 või 12000 pnk

Skaala: 1:48
Tootja: Eduard
Toote kood edu8229
Saadavus laos!

€29.98 või 19600 pnk

Skaala: 1:48
Tootja: Eduard
Toote kood edu84133
Saadavus laos!

€13.33 või 8700 pnk